If you’re new to flying DJI drones, you might be wondering how to turn them on and off. While it may seem like a simple task, it can be confusing for beginners.
In this guide, we’ll walk you through the process of How To Turn Off Dji Drone, including all the different models from the brand. We’ll also cover some common troubleshooting tips for DJI drones that won’t power on.
To turn on a DJI drone, first, make sure the battery is fully charged and installed properly. Then, press and hold the power button until the lights on the drone start to flash.
Release the button and wait for the drone to complete its startup sequence. To turn off the drone, press and hold the power button until the lights turn off.
How To Turn On/Off A DJI Drone
If you’re a new drone pilot, you may find it challenging to turn on and off your DJI drone. Don’t worry, though, as it’s an easy process that’s also safe for you and your device. Here’s a step-by-step guide to help you turn on and off your DJI drone:
- Ensure that your drone’s battery is fully charged and correctly installed.
- Locate the power button on the drone, and press and hold it until the lights start flashing.
- Release the power button and wait for the drone to complete its startup process. You’ll know it’s ready to fly when the lights stop flashing.
- To turn off the drone, press the power button once, and then press and hold it again. The device will make a beeping sound to signal that it’s powering down.
To operate your drone, you’ll need to connect your remote controller to a mobile phone with the DJI Fly app installed. You can download this app from the DJI website or your phone’s app store. Once you’re all set up and ready to fly, the app will give you some reminders to ensure a safe and successful flight.
When you’re ready to take off, you’ll see the take-off icon on the left side of the app. Press this icon, and a “take-off” overlay will appear on your screen, along with the camera feed from your DJI drone. Hold and press the take-off button, and the device will reach an altitude of 1.2 meters.
To land your drone after your flight, hold the return to home (RTH) button on your remote controller. The drone will ascend to around a 55-meter altitude, then return to its designated spot.
Once it lands, you can turn off the drone by pressing the power button once, then pressing and holding it again. You’ll hear the familiar beeping sound to let you know that it’s powering down.
If you encounter any issues with your drone’s power, such as it not turning on or off, check the battery connection, charging status, and remote controller connection. By following these steps and checking for these common issues, you’ll be able to operate your DJI drone with confidence and ease.
Why Does The Drone Turn Off Like This?
Have you ever wondered why you need to press the power button twice to turn off your DJI drone? Well, it’s actually a clever design feature by DJI to prevent accidental power-offs while in storage or standby mode.
By requiring two button presses to turn off your drone or remote controller, it ensures that you won’t accidentally turn it off when you don’t mean to.
It’s important to note that before you turn on your drone, you should ensure that both the drone and the remote controller have a full charge. This will ensure that you get the most out of your device.
And a friendly reminder never turns off your remote controller during flight as it can cause serious issues like pairing and configuration problems, and in the worst-case scenario, it can lead to your drone losing altitude and crashing.
Why My DJI Drone Won’t Turn Off?
If your DJI drone doesn’t turn off, it can be frustrating, but there are several troubleshooting steps you can take to fix the issue.
First, try holding down the power button on your drone for at least ten seconds to force a shutdown. If that doesn’t work, you can try disconnecting the battery from the drone. This will ensure a full power cycle and might help reset any issues that were causing the drone to not turn off.
If the issue persists, it may be a firmware or software issue. Try updating the firmware on both the drone and the remote controller using the DJI Fly app. If you’re still having trouble, you can try resetting the drone to its default settings or even contacting DJI’s customer support for assistance.
In any case, never attempt to force shut down your drone by disconnecting the battery or any other physical means, as it can cause damage to the device. Taking these steps should help you get your drone powered down and back to normal operation.
My DJI drone Won’t Turn On
If your DJI drone doesn’t turn on, there are a few things you can do to troubleshoot the issue. First, make sure that both the drone and the remote controller have a full charge. If the battery is low, the drone may not turn on at all.
Next, check to make sure that the battery is properly installed in the drone. Sometimes, the battery can become loose or not seated correctly, which can prevent the drone from turning on.
If these steps don’t work, try resetting the drone by pressing and holding the power button for at least 10 seconds. This will force the drone to shut down completely, and then you can try turning it back on again.
If your DJI drone still won’t turn on after trying these steps, there may be a hardware issue that requires professional repair. Contact DJI customer support for further assistance.
How To Turn Off A DJI Mini 2 and Mini 3?
If you own a DJI Mini 2 or Mini 3 drone, turning it off is a simple process. To begin, press the power button once, and then press and hold it for about three seconds. The drone will beep, and its lights will turn off, indicating that it has powered off.
It’s essential to ensure that you power off your drone correctly to prevent any damage to its internal components. Additionally, always make sure that your Mini 2 or Mini 3 has a full battery charge before turning it on.
If your DJI Mini 2 or Mini 3 drone doesn’t power off after pressing the power button, there might be an issue with the drone’s firmware or hardware. In this case, you can try a few troubleshooting steps, such as resetting the drone, updating the firmware, or contacting DJI support for further assistance.
Remember that proper maintenance and care are crucial for the longevity of your DJI Mini 2 or Mini 3 drone. By following the correct procedures when turning your drone on and off, you can help ensure that it stays in optimal condition for your next flight.
How To Shut Off DJI Mavic Air 2s and DJI Phantom 3?
If you own a DJI Mavic Air 2s or DJI Phantom 3 and are wondering how to turn them off, the process is quite simple.
To turn off your DJI Mavic Air 2s, press the power button once, then press and hold it for a few seconds until you hear a series of beeps. This indicates that the drone is powering down. You can also turn off the remote controller by pressing and holding the power button until you hear the same series of beeps.
For the DJI Phantom 3, there are two ways to turn off the drone. The first method is to press and hold the power button on the drone until it powers down. The second method is to use the DJI Go app and tap the “land” button. The drone will automatically land and power down once it touches the ground.
It’s important to note that for both drones, you should never turn off the remote controller during flight as it can result in pairing and configuration issues at the minimum. At worst, your DJI drone can lose altitude and crash, which can be catastrophic for your device.
Conclusion ( Final Thoughts)
In conclusion, turning on and off a DJI drone and remote controller is a simple process, but it is important to follow the correct steps to ensure the safe and proper operation of your device. Always make sure your drone and remote controller are fully charged before use, and never turn off your remote controller during flight to prevent potential pairing and configuration issues.
If you are experiencing issues with turning on or off your DJI drone, check the battery and power button, and consult the user manual or DJI customer support for further troubleshooting. Remember to always practice safe flying and follow regulations in your area to enjoy your DJI drone to its fullest potential.
It’s not easy to start using your new drone right away. You need to know how to fly it first. When you first buy your new drone, you should learn how to turn it on and off. Some drones come with a remote control that has two buttons.
One button turns it on while the other one shuts it off.
The other type of remote control does not have a power switch. If you are using this kind of remote control, you should learn how to turn it on and off as well.
Before you use the drone, you should familiarize yourself with the controls and features. This will make it easier for you to operate the drone correctly.
Faqs( Frequently asked question)
Q: How do I turn off my DJI drone?
A: To turn off your DJI drone, you need to press and hold the power button on the aircraft for several seconds until the lights on the drone turn off.
Q: Can I just pull the battery out of my DJI drone to turn it off?
A: No, it’s not recommended to just pull the battery out of your DJI drone to turn it off. Doing so could damage the battery and the drone. Always use the power button to turn off your drone.
Q: What should I do if my DJI drone won’t turn off?
A: If your DJI drone won’t turn off using the power button, try pressing and holding the button for a longer period of time. If that doesn’t work, you can try to reset the drone by pressing and holding the power button and the pause button simultaneously for several seconds.
Q: Is it safe to turn off my DJI drone mid-flight?
A: No, turning off your DJI drone mid-flight is unsafe. Doing so could cause the drone to crash and potentially cause damage or injury.
Q: Can I turn off my DJI drone using the remote controller?
A: No, you cannot turn off your DJI drone using the remote controller alone. You need to use the power button on the drone itself to turn it off.
Q: What should I do if my DJI drone turns off unexpectedly?
A: If your DJI drone turns off unexpectedly during flight, try to land it safely as soon as possible. Check the battery and other components for any signs of damage or malfunction before attempting to fly it again.